Dell Latitude CPx J - Manual (Page 107)

4. Click the Start button, then click Run....
The Run dialog box appears.
5. Click the Browse button.
6. Select the appropriate drive for your CD-ROM.
7. Locate the setup.exe file for the Dock QuickInstall program for your specific operating system. For
example, if you want to install Dock QuickInstall for a system running Windows 98, look under
\win98\dockquik\setup.
8. Click OK or press <Enter>.
9. Follow the instructions on your display.
10. After the files are copied to your hard-disk drive, click Finish to restart your computer.
Installing Docking Drivers
To install the C/Port Family APR or C/Dock Family Expansion Station drivers, perform the following steps:
1. If you have completed the operating system setup, turn on the computer, and then go to step 2.
2. Dock the computer.
The operating system creates a hardware profile for the C/Port APR or the C/Dock Expansion
Station.
3. To load the appropriate drivers for use with the C/Port APR or C/Dock Expansion Station, follow the
instructions on the display. When prompted, restart the computer.
4. Install the appropriate drivers to use with a network expansion card in the C/Dock Expansion Station.
Installing Video Drivers
Video drivers control features such as screen resolution and the number of screen colors.
NOTE: If you need to use extended video modes, check the documentation that came with the
application program to determine if the drivers are provided. If not, contact the software manufacturer
to get the necessary drivers.
To install the video drivers, perform the following steps:
1. Save your work in all open application programs, because you will need to restart your computer at the
end of this procedure to complete the installation.
2. Insert the System Software CD into the drive.
3. Click the Start button, then click Run.