4 jumpers and connectors – CyberResearch CPEX P4-24-X User Manual

Page 16

Advertising
background image

CPEX Series

CyberResearch

®

CPU Cards

4

©Copyright 2005 CyberResearch, Inc.


Audio

z

Audio: Realtek ALC655 AC’97 Audio CODEC, 16-bit, full-duplex AC'97
Rev. 2.3 compatible six-channel audio CODEC designed for PC
multimedia systems.

z

Connector: Line-out connector on rear I/O panel and CD-in, line-out,
mic-in pin-headers

Power Consumption & Environment

z

Power consumption:

Pentium 4 Northwood 3.0GHz CPU (2GB DDR400 DDR-SDRAM):
[email protected], [email protected], [email protected], [email protected].

Pentium 4 Prescott 3.4GHz CPU (2GB DDR400 DDR-SDRAM):
[email protected], [email protected], [email protected], [email protected].

z

Power Supply: 350-Watt power supply or higher is recommended.

z

Power control function: meets ACPI 1.1 specification.

z

Operating Temperature: 0°~60° (*CPU needs Cooler & silicone

heat

sink paste)

z

Relative Humidity: 5%~95%, non condensing


WARNING:
1. Never run the processor without the heat sink and CPU Fan.
2. Be sure to connect ATX_12V power connector (PW) for the CPU power.

1.4 Jumpers and Connectors

Jumpers on CPEX series can be used to set the system configuration according to
your application. CPEX series is also equipped with Connectors that allow you to
connect external devices such as HDD, FDD, K/B, Printer, etc.

The tables below list the function of jumpers and connectors on CPEX series.

Jumpers

Label

Function

CLR_CMOS

Clear CMOS Setup

JP1

Compact Flash Master/Slave Function Setting

Advertising
This manual is related to the following products: