CyberResearch CPEX P4-24-X - Manual (Page 48)

CPEX Series CyberResearch
®
CPU Cards
36 ©Copyright 2005 CyberResearch, Inc.
3.11 Chipset
The Chipset menu items allow you to change the advanced chipset settings. Select
an item then press Enter to display the sub-menu.
3.11.1 North Bridge Configuration
DRAM Frequency [Auto]
This menu allows you to configure DRAM Frequency.
Configuration options: [Auto] [333MHz] [400MHz]
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according to the
DRAM SPD (Serial Presence Detect). When disabled, you can manually set the
DRAM timing parameters through the DRAM sub-items.
Configuration options: [Disabled] [Enabled]
Memory Hole [Disabled]
Configuration options: [Disabled] [15MB-16MB]
Boots Graphic Adapter Priority [PCI/IGD]
a
Warning:
¾ Don’t do any change to the Advanced Chipset Settings, unless you
understand the impact thoroughly.
¾ Setting wrong values may cause system to malfunction.