CyberResearch CPEX P4-24-X - Manual (Page 46)

CPEX Series CyberResearch
®
CPU Cards
34 ©Copyright 2005 CyberResearch, Inc.
LAN Boot ROM support [Disabled]
This allows you to enable or disable the LAN boot function.
Configuration options: [Disabled] [Enabled]
Add On ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Allow you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
PS/2 Mouse Support [Auto]
Allow you to enable or disable support for PS/2 mouse.
Configuration options: [Disabled] [Enabled] [Auto]
Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for F1 key to be pressed when error
occurs.
Configuration options: [Disabled] [Enabled]
Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message ‘Press DEL to run Setup’
during POST.
Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt
19.
Configuration options: [Disabled] [Enabled]
Boot Device Priority
This menu is used to specify the boot device priority sequence.
Hard Disk Drives
This menu is used to specify the boot device priority sequence from available Hard
Disk Drives.
Removable Drives
This menu is used to specify the boot device priority sequence from available
removable drives.
CD/DVD Drives
This menu is used to specify the boot device priority sequence from available
CD/DVD drives.