CyberResearch CPEX P4-24-X - Manual (Page 82)

CPEX Series CyberResearch
®
CPU Cards
70 ©Copyright 2005 CyberResearch, Inc.
2. Specify a RAID Volume name and then press the <TAB> or <Enter> key to go to
the next field.
3. Select the strip value for the RAID 0 or RAID 1 array by using the “upper arrow”
or “down arrow” keys to scroll through the available values, and pressing the
<Enter> key to select and advance to the next field. The available values range
from 4KB to 128 KB in power of 2 increments. The strip value should be chosen
based on the planned drive usage. Here are some suggested selections:
16KB – Best for sequential transfers
64KB – Good general purpose strip size