CyberResearch CPEX P4-24-X - Manual (Page 49)

CyberResearch
®
CPU Cards CPEX Series
CyberResearch, Inc. 37
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [Internal VGA] [PCI/Int-VGA]
Internal Graphics Mode Select [Enable, 8MB]
Select the amount of system memory used by the internal graphics device.
Configuration options: [Enable, 1MB] [Enable, 4MB] [Enable, 8MB] [Enable, 16MB]
[Enable, 32MB]
Aperture Size Select [256MB]
Allow you to select the size of mapped memory for AGP graphic data.
Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB] [128MB] [256MB]
Video Function Configuration
DVMT Mode Select [Combo Mode]
Configuration options: [Fixed Mode][DVMT Mode][Combo Mode]
Boot Display Device [CRT+EFP]
Allow you to select the boot display device.
Configuration options: [CRT][EFP][CRT+EFP]
3.11.2 South Bridge Configuration
Azalia/AC’97 Selection [Enable]
Allow you to enable or disable the AC’97 Audio.
Configuration options: [Enable] [Disabled]
PRO-NIC Controller [Enable]
Allow you to enable or disable the onboard 10/100 LAN device.
Configuration options: [Enable] [Disabled]
Giga LAN Controller [Enable]
Allow you to enable or disable the onboard Giga LAN device.
Configuration options: [Enable] [Disabled]
Spread Spectrum Mode [Disable]
Allow you to enable or disable the spread spectrum modulation.
Configuration options: [Enable] [Disabled]
Restore on AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss.
When set to [Last State], the system goes into either off or on state
Whatever the system was state before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]