Dell OptiPlex GX150 - Manual (Page 106)

Back to Contents Page
Stand: Dell™ OptiPlex™ GX150 System User's Guide
Removing and Attaching the Small Form-Factor and Small Desktop Computer Stands
To remove the stand from the small form-factor and small desktop computers, perform the following steps:
1. Turn the computer over so that the stand is at the top.
2. Loosen the thumb screw and lift the stand away (see the following figures).
3. Place the computer in a horizontal position.
Small Form-Factor Computer Stand
Small Desktop Computer Stand
To attach the stand to the small form-factor and small desktop computers, perform the following steps:
1 Locator hole
2 Thumb screw
1 Locator hole
2 Thumb screw