Agp graphics card/gpa (aimm) card – Dell OptiPlex GX150 User Manual

Page 119

Advertising
background image

AGP Graphics Card/GPA (AIMM) Card

To install an AGP graphics card, perform the following steps.

1.

Open the computer cover

.

2. Remove the filler bracket (see the

back panel

for the location of the filler bracket [AGP slot]) by raising the hinged lever and sliding the

bracket up.

On the small desktop computer, press the indented tab with your thumb at an angle toward the system board until you release the tab.
Continue holding the lever and pull the lever up.


Removing the AGP Slot Filler Bracket in the Small Form-Factor Desktop System

Removing the AGP Slot Filler Bracket in the Small Desktop System

Removing the AGP Slot Filler Bracket in the Small Mini-Tower System

1 Securing clips (2)

CAUTION: To avoid the possibility of electric shock, turn off the computer and any peripherals, disconnect them from their
electrical outlets, and then wait at least 5 seconds before you open the computer cover. Also, before you upgrade memory,
see the other precautions in "

Safety Information

."

NOTE: The small form-factor and small desktop systems support low-profile AGP cards.

1 Hinged lever

1 Hinged lever

2 Indented tab

Advertising