Dell OptiPlex GX150 - Manual (Page 134)

9. Verify that your computer works correctly by running the Dell Diagnostics .
Replacing the Diskette Drive With the Combination Data Cable
1. Snap the replacement drive into the sled and ensure that it is secure in the sled.
2. Attach the diskette drive data cable to the back of the diskette drive by inserting the cable into the connector and then sliding the ZIF lever to
lock the cable into place.
Attaching the Diskette Drive Data Cable —Small Form-Factor System
3. Gently slide the drive into the chassis until the tabs securely click into position.
Replacing the Diskette Drive —Small Form-Factor System
4. Connect the interposer board to the optical drive and connect the power cable and audio cable.
Attaching Cables —Small Form-Factor System
5. Connect the combination data cable to the diskette and interface (IDE2) connectors on the system board.
6. Close the computer cover .
Removing the Diskette Drive —Small Desktop and Small Mini-Tower System
1. Open the computer cover .
1 Diskette-drive data cable
2 ZIF lever
1 Diskette-drive data cable
1 Power cable
2 Audio cable
3 Interposer board
4 ZIF lever
5 Combination data cable
6 System board diskette drive connector
7 System board interface connector (IDE2)