Dell OptiPlex GX150 - Manual (Page 16)

MIC Notice (Republic of Korea Only)
To determine which classification (Class A or B) applies to your computer system (or other Dell digital device), examine the Republic of Korean
Ministry of Information and Communications (MIC) registration labels located on your computer (or other Dell digital device). The MIC label may be
located separately from the other regulatory marking applied to your product. Line three of the label identifies the emissions class for the product
—
"( A)" for Class A products or "(B)" for Class B products.
l Class A devices are for business purposes.
l Class B devices are for nonbusiness purposes.
Class A Device
Please note that this device has been approved for business purposes with regard to electromagnetic interference. If you find that this device is not
suitable for your use, you may exchange it for a nonbusiness-purpose device.
MIC Class A Regulatory Label
Class B Device
Please note that this device has been approved for nonbusiness purposes and may be used in any environment, including residential areas.
MIC Class B Regulatory Label
Polish Center for Testing and Certification Notice
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together
(computer, monitor, printer, and so on) should have the same power supply source.
The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal
value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the
equipment and easily accessible.
NOTE: MIC emissions requirements provide for two classifications: