Attaching cables – Dell OptiPlex GX150 User Manual

Page 141

Advertising
background image

Attaching Cables to an Optical Drive

—Small Mini-Tower System

5. If the drive was previously empty,

remove the front-panel insert

from the front panel.

6.

Close the computer cover

.

Front-Panel Inserts (Small Desktop and Small Mini-Tower Chassis)

Removing Front-Panel Inserts

—Small Desktop Chassis   

1.

Facing the front of the computer, use your fingers to remove the front-panel cover.

2. Press on the insert until it pops free of the front-panel cover.

 

1 Optical drive data cable

2 Optical drive interface connector

3 Power cable

4 Power connector

5 Audio connector

6 Audio cable

1 Power connector

2

Optical  drive data cable

3 Audio connector

4 System board interface connector (IDE2)

NOTE: If you install a second optical device, do not route the cable through the plastic clips on the side of the diskette drive bay.

1 Optical drive front-panel cover

2 Diskette drive front-panel cover

Advertising