Dell PowerEdge RAID Controller H200 - Manual (Page 26)

26
Hardware Installation
6 Insert the controller gently, but firmly, until the controller is firmly seated
in the PCI-E slot. See Figure 4-1.
NOTE:
Figure 4-1 displays the 6Gbps SAS HBA, but the installation instructions
in this section are common for the H200 Integrated, H200 Adapter and 6Gbps
SAS HBA.
NOTE:
The H200 Integrated card may have a dedicated PCI slot. For additional
details, see the system’s Hardware Owner's Manual on the Dell Support website at
support.dell.com.
Figure 4-1. Installing a 6Gbps SAS HBA
1 bracket screw 2 6Gbps SAS HBA
3 PCI-E slot
1
2
3
PERC H200.book Page 26 Tuesday, July 13, 2010 4:15 PM