Dell PowerEdge T410 User Manual
Page 137
Advertising
Installing System Components
137
11 Rotate the processor shield upward and out of the way. See Figure 3-23.
12 Lift the processor out of the socket and leave the release lever up so that
the socket is ready for the new processor.
CAUTION:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
Figure 3-23.
Installing and Removing a Processor
1
socket-release lever
2
processor
3
processor shield
4
notch in processor (2)
5
socket key (2)
6
ZIF socket
2
6
1
3
5
4
book.book Page 137 Tuesday, June 9, 2009 4:09 PM
Advertising