Dell PowerEdge T410 - Manual (Page 27)

About Your System
27
Hard drive failure. Ensure that the diskette drive and
hard drive are properly connected.
See Hard Drives for information
on the drives installed in your
system.
Possible USB failure. See "Troubleshooting a USB
Device" on page 156.
No memory modules
detected. See "Troubleshooting System
Memory" on page 162.
System board failure. See "Getting Help" on page 185.
Memory configuration
error. See "Troubleshooting System
Memory" on page 162.
Possible system board
resource and/or system
board hardware failure. See "Getting Help" on page 185.
Possible system resource
configuration error. See "Getting Help" on page 185.
Other failure. Ensure that the diskette drive,
optical drive, and hard drives are
properly connected. See
"Troubleshooting Your System" on
page 155 for the appropriate drive
installed in your system. If the
problem persists, see "Getting
Help" on page 185.
Table 1-1. Diagnostic Indicator Code (continued)
Code Causes Corrective Action
book.book Page 27 Tuesday, June 9, 2009 4:09 PM