Configuring ethernet over mpls – Cisco 10000 User Manual

Page 387

Advertising
background image

18-19

Cisco 10000 Series Router Software Configuration Guide

OL-2226-23

Chapter 18 Configuring L2 Virtual Private Networks

Configuration Tasks for L2VPN

Example 18-9

configures OAM cell emulation for ATM AAL5 SDU support over MPLS in VC class

configuration mode. The VC class is then applied to an interface.

Example 18-9 OAM Cell Emulation for ATM AAL5 SDU Support over MPLS in VC Class Configuration

Mode—VC Class Applied to an Interface

vc-class atm oamclass

encapsulation aal5

oam-ac emulation-enable 30

oam-pvc manage

interface atm1/0

class-int oamclass

pvc 1/200 l2transport

xconnect 13.13.13.13 100 encapsulation mpls

Example 18-10

shows how to configure OAM cell emulation for ATM AAL5 over MPLS in VC class

configuration mode. The VC class is then applied to a PVC.

Example 18-10 OAM Cell Emulation for ATM AAL5 SDU Support over MPLS in VC Class Configuration

Mode—VC Class Applied to a PVC

vc-class atm oamclass

encapsulation aal5

oam-ac emulation-enable 30

oam-pvc manage

interface atm1/0

pvc 1/200 l2transport

class-vc oamclass

xconnect 13.13.13.13 100 encapsulation mpls

Example 18-11

shows how to configure OAM cell emulation for ATM AAL5 over MPLS in VC class

configuration mode. The VC class is then applied to an interface. One PVC is configured with OAM cell
emulation at an AIS rate of 10. That PVC uses the AIS rate of 10 instead of 30.

Example 18-11 OAM Cell Emulation for ATM AAL5 SDU Support over MPLS in VC Class Configuration

Mode—VC Class Applied to an Interface

vc-class atm oamclass

encapsulation aal5

oam-ac emulation-enable 30

oam-pvc manage

interface atm1/0

class-int oamclass

pvc 1/200 l2transport

oam-ac emulation-enable 10

xconnect 13.13.13.13 100 encapsulation mpls

Configuring Ethernet over MPLS

Ethernet over MPLS works by encapsulating Ethernet protocol data units (PDUs) in MPLS packets and
forwarding them across the MPLS network. Each PDU is transported as a single packet. Several methods
exists for configuring Ethernet over MPLS:

VLAN mode—Transports Ethernet traffic from a source 802.1Q VLAN to a destination 802.1Q
VLAN over a core MPLS network.

Advertising