Canon BJC-50 - Manual (Page 121)

112
The international character sets 8 to 13, and 64 can be selected only by using the escape code ESC R.
EPSON character tables
Two character tables—the Italics character table and the Graphics character table—are available in
LQ mode. The Italics character table has control codes in two places: between ASCII 0 and ASCII 31
and also between ASCII 128 and ASCII 159. In addition, in the Italics character table, characters
between ASCII 160 and ASCII 255 are italic characters of characters between ASCII 0 and ASCII
127, whatever code page you select.
The Graphics character table has control codes only in one place:
between ASCII 0 and ASCII 31. All other characters are printable. The characters between ASCII 32
and ASCII 126 are always as shown in the table on the next page. The characters between ASCII 128
and ASCII 255 vary depending on your selected code page. The Graphics character table shown on
the next page is for when the code page is set to 437 USA.
The control codes between ASCII 0 and ASCII 31 can be changed to printable characters by using the
ESC
(^ control code.
When you select a code page to print characters and symbols of your language, select the Graphics
character table. Otherwise, the characters and symbols between ASCII 128 and ASCII 255 are
changed to Italics characters.
112