Canon BJC-50 - Manual (Page 65)

63
1. Press the POWER button to switch the printer off.
2.
Attach the AC adapater cord to the right side of the printer and
plug the other end of the AC adapter to a power source.
The CHARGE/ERROR lamp will remain illuminated green until the battery pack is
completely recharged.
3. When the CHARGE/ERROR lamp goes off, you can disconnect the AC adapter.
z The battery pack requires six hours (maximum) to recharge.
z The battery pack may become warm during a long print job and may not start recharging until
it has cooled (max. 30 minutes).
63