Canon BJC-50 User Manual
Page 27
.
.
25
3.
Make sure the computer is set up for IrDA operation.
To use IrDA successfully, make sure the following conditions are satisfied:
z
You must use Windows 95.
z
Make sure the infra-red driver Microsoft IR Comm Driver Ver. 2.0 has been installed.
z
Make sure a COM port has been selected for IrDA with the Printer Wizard.
z
Make sure the BJC-50 is selected as the default printer with the BJC-5O printer driver.
z
Only the Microsoft IR Comm Driver Ver. 2.0 can be used as the IrDA driver for the BJC-
50. Other IrDA drivers cannot be used.
z
The IrDA interface cannot detect the printer status and reset the printer. If communication
between the printer and computer is inteffupted and the print job is stopped, the printer is
initialised automatically. (The buffer memory of the printer is cleared and the paper is
ejected.)
25