RearviewSafety RVS-MDVR - Manual (Page 11)

W 2 0 1 2 P
CHAPTER 3 SYSTEM MENU SETTING INSTRUCTIONS
3.1: DEMO WORKING AND USER LOGIN.
Trun on the device after power supply and other connecting successfully and according to
installation guidance. Interface refer to 3-1and there are four-image monitoring interface
after the device start working.Press LOGIN button on the remote control ,then direct into login
interface,as 3-3 for reference
Figure
Figure
" "
INSTRUCTIONS:
Figure
DEVICE NUM:
User set number for every different device and it will show in the right of the number
input box. User enter the number as showing, one number only for one device .
USER NAME:
Including admin and normal user, regular user permission only could enter into video
searching ,playback , information and other menu, but can not set the menu and data. Admin gets the
permission to modify the system parameters.
PASSWORD:
Enter password according to the selected user name. When password is correct , select
down button move to LOGIN , and press ENTER to log in., When password is incorrect, press
CANCEL and delete ,then reenter the correct password. Admin
password is 111111 , the main
interface after entering password is as showing as 3-4.
" " " "
" "
Figure 3-1 Figure 3-2
System menu includes seven main menus: SYSTEM, RECORD, VEHICLE, TOOL , PLAYBACK ,
MODULE , INFO. Main menus is as Figure 3-4 shows:
Figure 3-3 Figure 3-4
1 All submenu settings must save ,then effect, otherwise invalid.
2. Check box if filled means function selected , not filled means function not selected.
3 Number inputs can use number button on the remote control enter directly or
use soft keyboard. Letter only can complete via soft keyboard,press RETURN
button to get back .
" "
9
SD Card Mobile DVR User Manual
9