RearviewSafety RVS-MDVR - Manual (Page 13)

W 2 0 1 2 P
3.3-3:NETWORK SETUP
1.CENTER :
The server IP is the same as the CMS server IP. Control Port is the same with Gateway Server Port
Number. Usually is 8501
2.Server IP is the IP that MDVR uses to connect to the CMS platform via 3G or WIFI. Normally it is the
fixed WAN IP. Our devices can support 3G and WIFI functions. If the devices do not have these
functions,this menu can be passed.
SETUP
" ".
1:Press ENTER to switch ON/OFF.
2:Admin can modify the user password and admin password. The default password for admin
password is "111111", after password modification completed, exit the menu and use the new password
to enter the interface. " "
Figure 3-10
3.3-4 PASSWORD SETUP
Figure 3-11
1.Power on/off mode
: Select from TIME /ACC mode, and press "ENTER" to switch.
ACC mode means when the vehicle powers on, the device will start working. Recommend to select it
as the default mode. Timing mode means the device will turn on or power off during the fixed time.
2.Delaying off setting
:when select ACC mode or TIME mode,can set delay off and the time is
3-240mins, after setting ,demo will continue the delaying time.
3.3-2 POWER OFF/ON SETUP
4.
"COMPANY NAME","VEHICLE NUM","DRIVER NAME""LINE NUM"Setting: Press "Enter" key
to pop up keyboard window, then use left/right/up/down/enter key to setup.
5.
When turn on automatic adjustment function, in the default time , the system will adjust the time
via GPS automatically when it comes to the time for adjustment.
6.HOME PAGE
: There are "DEV STA"and "QUAD" two options, QUAD is the normal monitoring
screen when we turn on the device. If select DEV STA system information will appear in the four
channels normal screens .It is equal the function when we press the button"INFO".
Figure 3-8
YMD
30 ( )
06:00:00
Figure 3-9
5 MIN
06:00:00
22:00:00
11
SD Card Mobile DVR User Manual
11