Sound Anchors BAREFOOT STUDIO MONITOR STAND - Manual (Page 10)

TILT ADJUSTMENT
1. Start by tightening the 7/16-14 mounting bolts so that the speakers are level. To the
stand
2. If you wish to use the speakers level snug up the mounting bolts by tightening both
bolts the same amount.
3. If you wish to tilt your speakers down loosen the top bolt and tighten the bottom bolt
1/4 turn at a time until the desired speaker tilt is achieved.
4. After setting tilt tighten both bolts the same amount a little at a time until the bolts are
tight.
5. If you wish to tilt your speakers up loosen the bottom bolt and tighten the top bolt 1/2
turn at a time until the desired speaker tilt is achieved.
6. After setting tilt tighten both bolts the same amount a little at a time until the bolts are
tight.