Sony CCD-TR9 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to edit
4
6
5
3
1
Insert a tape to be recorded into the
recording VCR.
Siide EDIT on the camcorder In the direction of
the anxMw.
EDIT
Make sure that IN/OUT is set to OUT.
IN
OUT
|4
While pressing the small green button on POWER,
slide POWER to VTR.
POWER
ICAMERAiPf&i VTR I
Insert your recorded tape into the camcorder.
Play back tape on the camcorder until you locate
the point where you want to start editing, then set the
camcorder to the playback pause mode.
On the recording VCR, locate the recording start
point and set the VCR to the recording pause mode.
8
Press
II
PAUSE on the camcorder and VCR
simultaneously to start editing.
Chapter 3: Advanced Operation
51