Changing or adjusting the color temperature, Changing the on-screen display position, Customizing your monitor – Sony CPD-L181 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Customizing Your Monitor
!
Changing or Adjusting the Color
Temperature
The color temperature is set to 9300K at the factory.
You can change the color temperature to 6500K or 5000K.
Use this function to adjust the color temperature so that it
matches the actual colors of a printed picture.
Once the color temperature is adjusted, it will be stored in
memory for all input signals received.
1 Press the MENU button.
The MENU OSD appears.
MENU
► EXIT
iSÈPHASE
(D3PITCH
©CENTER
SZOOM/SMOOTHING
aCOLOR
BLANGUAGE
eOPTION
2 Press the
{}/■(}
buttons to select COLOR, and press the
MENU button again.
The COLOR OSD appears.
-:
q
:-Q
3
MENU
o
COLOR
^9300K
6500K
5000K
USER
MODE
R
B
□
50
G
50
B
B
Q
50
Press the buttons to select the color
temperature.
If you need to make further adjustments to the selected
color temperature, go to step 4.
If you don't, press the MENU button. The MENU OSD
appears.
Press the buttons to select R (red) or B (blue),
and press the
+/-
buttons to get the desired color.
The color changes as the R or B components increase or
decrease with respect to G (green).
.
(3
COLOR
9300K
6500K
5000K
G
mt~l
50
B B 1
I
0 50
Changing the On-Screen Display
Position
You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
1 Press the MENU button.
The MENU OSD appears.
MENU
KexiT
.
PHASE
QIDPITCH
©CENTER
SSZOOM/SMOOTHING
SCOLOR
BLANGUAGE
eOPTION
2 Press the buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
«3
MENU
3
OPTION
I*' ® {_
&
Eo
|@: 5SEC
O": UNLOCK
OSD H POSITION
3 Press the buttons to select S (OSD H POSITION)
or (3 (OSD V POSITION).
To adjust the horizontal
position
OPTION
To adjust the vertical
position
OPTION
S
I
ira L
0^
Ecn
5SEC
o^: UNLOCK
-»•<-
OSD H POSITION
5
s r
Ea L
; t H
5SEC
On: UNLOCK
OSD V POSITION
4 Press the +/- buttons to move the OSD to the desired
position.
3
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
14