Sony CPD-L181 - Manual (Page 5)

Identifying Parts and Controls
See the pages in parentheses for further details.
Front
Q] (!) (power) switch and indicator (pages 8,
17)
Turns the monitor on or off.
The indicator lights up in green when the monitor is
turned on, and either flashes in green and orange or
lights up in orange when the monitor is in power
saving mode.
MENU (menu) button (pages 9 - 16, 19)
Displays the MENU OSD (On-Screen Display).
p; (brightness) (D) button (pages 9-16)
Adjusts the picture brightness.
Functions as the button when selecting menu items.
3 (contrast) (^) button (pages 9-16)
Adjusts the contrast.
Functions as the button when selecting menu items.
+/- (adjust) buttons (pages 11 -16)
Adjusts the selected menu item.
AUTO button (page 10)
When the signal from the computer is displayed on this
monitor, press the AUTO button to automatically adjust
the picture to the computer.
You also should press this button if the picture is not
centered or if it is fuzzy.
I
Getting Started
-€)1, 2 input switch and indicator (page 8)
Selects the input signal from -31 or -32. Each time you
press the button, the input changes and the
corresponding indicator lights up.
POWER (main power) switch (page 8)
To turn on the main power, press the side. To turn
off, press the "O" side.
-S1/-S2 input connectors (HD15) (pages 6,
8)
Input analog RGB video signals (0.714 Vp-p, positive)
and SYNC signals.
AC IN connector (page 6)
Provides AC power to the monitor from the wall outlet.
This connector is used by service personnel only. Do not
connect anything to this outlet.