Sony MDS-JE330 - Manual (Page 11)

Using the Display
m buttons (14-16, 21, 25, 29, 34, 38)
Press to locate tracks, adjust the recording level, or
select a menu item.
51
«button (15-17)
Press to record on the MD, monitor the input signal, or
mark track numbers.
53 T.REC button (18)
Press during recording pause to start Time Machine
Recording.
51 O
button (15,21)
Press to start play.
51
NAME button (34)
Press to add the name or change the name of a track or
MD.
CHAR button (34)
Press to select the type of characters to be input when
naming a track or MD.
S DI5PLAY button (12, 16, 25)
Press to select the information to be displayed in the
window.
5CROLL button (12)
Press to scroll the name of a track or MD,
m MENU/NO button (14, 29, 38)
Press to display "Edit Menu" or "Setup Menu."
YES button (14, 25. 29, 38)
Press to carry out Ihe selected operation.
H ± button (15, 21)
Press to eject the MD.
The display window shows information about the MD or
track. This section describes the information that appears
for each deck status.
LEVEL/DISPLAY/CHAR
Note
The type of information (e.g., total number of tracks, recordecd
time, remaining time, track or disc name) which was last
displayed will continue to appear until you change it by pressing
LEVEL/DISPLAY/CHAR (or DISPLAY), even if you change the
deck operation status. For example, if the remaining time was
displayed when you stop the deck, the remaining time will
continue to appear when you begin playing the same MD again
or a different one.
When you insert an MD
The display automatically changes as follows:
Disc name
0 ft
o'
3
■ o
vt
fi)
3
a
m
X
*0
oT
3
b
o'
3
S O N G S
Total number of tracks Total recorded time
S t ; 4 6 m 0 8 s
11