Getting, Started, Before you start the hookup – Sony MDS-JE330 User Manual

Page 4: Checking the supplied eceessories, Inserting batteries into the remote, Getting started

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Getting
Started

This chapter provides information on
the supplied accessories, Jfljings you
should keep in mind while hooking
up the system, and how to connect
yaiipus audio components to the MD
deck. Be

Slue

to read this chapter .

thoroiighly before you actually
connect anything to the deck.

Before You Start the
Hookup

Checking the supplied eceessories

This MD deck comes with the foiiowing items:

• Audio connecting cords (2)
• Opticai cabie n )
• Remote commander (remote) RM-D29M (i)
• R6 (size-AA) batteries (2)

Inserting batteries into the remote

Insert two R6 (size-AA) batteries with the + and -
properly oriented to the markings into the battery
compartment. When using the remote, point it at the
remote sensor on the deck.

i

When to replace the batteries

Under normal conditions, the batteries should last for about six
months. When the remote no longer operates the deck, replace
both batteries with new ones.

Notes

• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or lighting

apparatus. Doing so may cause a malfunction.

• If you don't use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery
leakage and corrosion.

Advertising