Sony MDS-JE330 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

30

(0

rt

O

a

5'

iO

0

3

S

a

Synchro-recording With a Sony CD Player
(CD Synchro-recording)

Operations you may want to do during CD
Synchro-recording

To

Press

Stop recording

CD-SYNC STOP

Pause recording

CD-SYNC STANDBY or CD

PLAYER

II

Locate the next track to be
recorded during recording
pause

CD PLAYER

Resume recording after

CD-SYNG START or CD

pausing

PLAYER

II

Check the remaining
recordable time on the MD

DISPLAY (page 12)

i You can use the remote of the CD player during CD Synchro­

recording

Press To change the deck to

And change the CD player to

Recording

Play

■ Recording pause

Stop

II

Recording pause

Pause

? During CD Synchro-recording, track numbers are marked tn

the following ways:

• When the CD player is connected to the DIGITAL (OPTICAL)

IN connector, track numbers are automatically marked as they
appear on the CD.

• When the CD player is connected to the LINE (ANALtXi) IN

jacks, track numbers are automatically marked when "T.Mark

LSync" has been selected (page 17).

• When you resume recording after recording pause, a new track

number is automatically marked, regardless of the track
marking parameter setting ("T.Mark LSync" or " T.Mark Off").

V

You can change CDs during CD Synchro-recording

1

Press

on the CD player's remote.

2

Change the CD.

3

Press on the CD player's remote.

Recording resumes.

Q You can also perform synchro-recording with a Sony video

CD player

By reprogramming the MD deck’s remote, you can use the
procedure above to perform Synchro-recording with a Sony
video CD player.
Press number button 2 while pressing down

l/(!)

on the MD

deck's remote. You can now operate the MD deck and the video
CD player with the remote. To control the CD player again, press
number button 2 while pressing down l/C!) on the MD deck's
remote.

Notes

• When performing CD Synchro-recording with a CD player

with a mode selector, be sure to set the selector to CDl.

• When you record tracks from certain CD or multi-disc players,

the entire material may be recorded as a single track.

20

Advertising