Connecting the ac power cord – Sony MDS-JE330 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Hooking Up the Audio Components
D
a
3
(O
ai
a
a
Setting the voltage (only on models
supplied with a vottagp selector)
Make sure the voltage selector on the rear panel of the
deck is set to the voltage of the local power supply. If not,
use a screwdriver to change it to the correct position
before connecting the AC power cord to a wall outlet.
VOLTAGE SELECTOR
X
11G-120V-'
^
220-240\T^
Connecting the AC power cord
Connect the AC power cord of the deck to a wall outlet.
Note
Do not connect the AC power cord to a switched outlet.
Advertising