Sony MDS-JE330 - Manual (Page 35)

5 Turn AMS (or press repeatedly) until the
number of the track (when naming a track) or
"Disc" (when naming a disc) flashes, then press
AMS or YES to enter the copied name.
"Complete!!" appears for a few seconds and the name
is copied.
To cancel the operation
Press MENU/NO or ■ .
i When “Overwrite ??" appears in step 5 above
The track or the disc selected in step 5 already has a name. If you
wish to replace the name, press AMS or YES again while the
indication appears in the display.
Q You can undo the copying of a track or disc name
For details, see "Undoing the Last Edit" on page 36.
Renaming a track or MD [X]
1 Press NAME while the deck is in one of the
operating statuses listed below, depending on
what you want to rename:
To rename Press while the deck is
A track Playing, paused, recording, or stopped
with the track number displayed
TheMD Stopped with no track number displayed
A track or disc name appears in the display.
2 Press down CLEAR until the selected name is
erased completely.
3 Do steps 6 to 9 of "Naming a track or MD using the
controls on the deck" on pages 33 and 34 or steps 2
to 4 of "Naming a track or MD using the remote"
on page 34.
4 Press NAME.
4 Turn AMS (or press [«/►►i repeatedly) until the
number of the track (when erasing the track name)
or "Disc" (when erasing the disc name) flashes,
then press AMS or YES.
"Complete!!" appears for a few seconds and the name
is erased.
To cancel the operation
Press MENU/NO or ■ .
? You can undo the erasing of a track or disc name
For details, see "Undoing the Last Edit" on page 36.
Erasing all the names on the MD
You can erase all the track names and the disc name on an
MD in a single operation.
1 While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display.
2 Turn AMS (or press repeatedly) until
"Name ?" appears, then press AMS or YES.
3 Turn AMS (or press N◄/►►1 repeatedly) until "Nm
All Ers ?" appears, then press AMS or YES.
"Nm All Ers??" appears in the display.
4 Press AMS or YES.
"Complete!!" appears for a few seconds and all the
names on the MD are erased.
To cancel the operation
Press MENU/NO or ■ .
9 You can undo the erasing of all the names on the MD
For details, see "Undoing the Last Edit" on page 36.
9 You can erase all the recorded tracks and names on the MD
For details, see "Erasing all the tracks on an MD" on page 30.
m
a
3
la
X
a
a.
a
a.
S
o
Erasing a track or disc name
Use this function to erase the name of a track or disc.
1 While the deck is stopped, playing, recording, or
paused, press MENU/NO.
"Edit Menu" appears in the display.
2 Turn AMS (or press l◄◄/►►l repeatedly) until
"Name ?" appears, then press AMS or YES.
3 Turn AMS (or press «◄/►►I repeatedly) until "Nm
Erase ?" appears, then press AMS or YES.
35