Erase or add the channel you want, 6 when you finish, press menu, 1 press menu – Sony KV-32XBR100 User Manual
Page 16: 5 press menu to return to the original screen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Erase or add the channel you want:
(1) Press the joystick up or down to select ERASE or
ADD.
(2) Press CH +/- or 0-9 buttons to select the
channel you want to erase or add.
Selected channel number
©
0
©
©
0 ©
© 0 d
^ ENTEr.
® O
(3) Click the joystick.
• If you select ERASE in step (1), appears
beside the channel number, showing that the
channel is erased from the preset memory.
• If you select ADD in step (1), "+" appears
beside the channel number, showing that the
channel is added to the preset memory.
5
To erase and/or add other channels, repeat
step 4.
6 When you finish, press MENU.
MENU
Notes
• If you erase or add a VHP or UHF channel, the cable TV
channel with the same number is also erased or added.
• If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
• Erasing and adding channels is also available for the AUX
input.
Setting cable TV on or off
If you have connected the TV to a cable TV system, set
CABLE to ON, the factory setting. If not, set CABLE to
OFF. You do not have to do this procedure if you
execute AUTO SET UP (page
14).
Do this procedure
only when you want to set it manually.
1
Press MENU.
2
Press the joystick up or down to move the
cursor (W) to SET UP and click the joystick.
3
Press the joystick up or down to move the
cursor (W) to CABLE and click the joystick.
I CABLE BION
Use ({) RETURN® Exit ®
4
Press the joystick up or down to select ON
or OFF and click the joystick.
B CHANNEL ERASE/AOD
B CHANNEL CAPT10NA.0G0
B FAVORITE CHANNEL
B DIRECTION :N HIGH
I DIRECT PLAY
17V INPUT: OFF
t
CABLE: OFF
AUTO PROGRAM
I CUSTOMIZED POINTER
9 LANGUAGE : ENGLISH
iZ)
Use (♦) RETURN® Exit
5
Press MENU to return to the original screen.
Note
• If CABLE appears in grey, the TV is set to a video input and
you cannot select CABLE. Press TV/VIDEO on the remote
commander so that a channel number appears.
16
Getting Started