Sony KV-32XBR100 - Manual (Page 29)

For details on each item, see "Effect of picture
settings" below.
Effect of picture settings
Item Picture effect
STANDARD Standard
MOVIE Finely detailed picture
SPORTS Vivid, bright picture
NEWS Reduced noise in picture
GAME Softer picture
Adjusting the picture in PROGRAM
PALETTE
1
Press MENU.
2
Press the joystick up or down to select
VIDEO and click the joystick.
I MODE ; STANDARD
I m PICTURE
¡»HUE
H COLOR
1 BRIGHT ■■■»•"<»••«•
I @ SHARP
TBINITONE : HIGH
i NR ; OFF
I DYNAMIC PICTURE ; OFF
i COLOR CORRECTION: OFF
ID S3 RESET
Use (♦) RETURN® Exit
3
Press the joystick up or down to select
MODE and click the joystick.
ra STANDARD
[%MOVIE
O SPORTS
0NEWS
□ GAME
Use (*) RETURN® Exit 5
Press the joystick up or down to select the
item you want to adjust and click the
joystick.
I Bt MODE: MOVIE
1[%^ICTURE
□ HUE ....
dn COLOR aiM.......
]□ BRIGHT .........................................
yn SHARP
HDTRINITONE : HIGH
an NR : OFF
]□ DYNAMIC PICTURE : OFF
SjO COLOR CORRECTION; OFF
i a Z ) PRESET
Use (j) RETURN® Exit I®
5
Adjust the picture according to the steps 3
to 5 in "Adjusting the picture" on page 23.
To restore the factory setting
While the VIDEO menu is displayed, press the joystick
up, down, right or left to select RESET and click the
joystick.
Using the INPUT/
OUTPUT STATUS
menu
Selecting an output signal (INPUT/
OUTPUT STATUS)
You can select an output signal from the SELECT OUT
jacks at the rear of the Feature box.
TV/VIDEO -S) CD CO
© © ©
© © ©
© ® ©
Q © o
MENU
Joystick
1
Press MENU.
2
Press the joystick up or down to select
INPUT/OUTPUT STATUS and click the joystick.
I ©VIDEO LABEL ©D
Use (|) RETURN® Exit ®
3
Select MONITOR OUT, EDIT OUT or TV OUT.
Select To
MONITOR OUT Output the signal of the picture
displayed on the TV screen.
Use this option to edit tapes while
monitoring.
EDIT OUT Output the signal input to the TV
regardless of the displayed picture on
the screen.
Use this option to edit tapes while
watching an input image different
from that being recorded.
TV OUT Output the TV signal.
Use this option when you connect an
AV receiver to the VIDEO 1 IN jacks.
(continued)
Operations
I
29