Sony KV-32XBR100 - Manual (Page 39)

Selecting a VCR input directly (DIRECT
PLAY)
The DIRECT PLAY feature allows you to switch from
TV input to VCR input mode by pressing the ►
(playback) button on the supplied remote commander.
For example, connect your VCR to the VIDEO 1 IN
jacks and set the VTRl 2 3 MDP selector to VTR2. After
completing the procedure below, the input mode is
switched to the VCR connected to the VIDEO 1 IN
jacks when you press the ► button.
1
Press MENU.
2
Press the joystick up or down to select SET
UP, and click the joystick.
3
Press the joystick up or down to select
DIRECT PLAY and click the joystick.
IBVIOEOI :OFF
11^IDE02 : OFF
I®
VIDEOS-.OFF
|SVIDE04:0FF
3 VIDEOS : OFF
iI5
c
ID
Use RETURN© Exit IS
Press the joystick up or down to select the
input to which the video equipment is
connected and click the joystick.
BOFF
BVTR1
BIVTR2
:%ATR3
Use RETURN© Exit IS
Customizing the pointer (CUSTOMIZED
POINTER)
You can select the desired cursor (pointer) from among
eight different designs and/or colors.
1
Press MENU.
2
Press the joystick up or down to select SET
UP and click the joystick.
3
Press the joystick up or down to select
CUSTOMIZED POINTER and click the joystick.
B CHANNEL ERASE/AOO
Q CHANNEL CAPTION/LOGO
□ FAVORITE CHANNEL
□ DIRECTION : N HIGH
3 DIRECT PLAY
@TV INPUT: OFF
B CABLE ; ON
I® AUTO PROGRAM
IH CUSTOMIZED POINTER
jl^NGUAGE : ENGLISH
Use (}) RETURN® Exit ®
Press the joystick in any of eight directions
to select the desired cursor and click the
joystick.
Press the joystick up or down to select the
position of the VTR1 2 3 MDP selector and
click the joystick.
Operations 39