Sony KV-32XBR100 - Manual (Page 30)

To select MONITOR OUT:
(1) Make sure the cursor is beside MONITOR OUT
and click the joystick.
(2) Press TV/VIDEO to select the input to the TV
and click the joystick.
TV/VIDEO
To select EDIT OUT:
(1) Press the joystick up or down to select EDIT
OUT and click the joystick.
(2) Press the joystick up or down to select the input
to be edited and click the joystick.
S VIDEO LABEL 9 Z D
Use $ RETURN®Exit®
To select TV OUT:
(1) Press the joystick up or down to select TV OUT
and click the joystick.
"Set up using only VIDEOl input?" appears.
f“ ’sour
H dv
Set up using
only V1DE01
input?
RIYES
l%NO
I
Use (♦) RETURN® Exit
(2) If you cormect only an AV receiver to your TV,
press the joystick up or down to select YES.
Then click the joystick. You can always select
the signal from the receiver by pressing TV/
VIDEO once.
If you connect your audio/video equipment to
the TV, select NO. You can select any of the
VIDEO 1 to VIDEO 5 inputs with the TV/
VIDEO button.
Note
• When you set INPUT/OUTPUT STATUS to TV OUT, you
cannot swap the main/right and window/left pictures.
Setting video labels (VIDEO LABEL)
This feature allows you to label each input mode so
that you can easily identify the connected equipment.
For example, you can label VIDEO 2 IN as VHS.
1
Press MENU.
2
Press the joystick up or down to select
INPUT/OUTPUT STATUS and click the Joystick.
3
Press the joystick up, down, right or left to
select VIDEO LABEL and click the joystick.
V^O 1 1
_
VIDEO VHS
VIDEO 3. ftmm
VIDEO 4 I BETA
VIDEO Sl LD
S VIDEO
Hi-8
AVRfCEIVFF
DSS
Use (f) RETURN® Exit ®
Press the joystick up or down to select the
input mode you want to label and click the
joystick.
5
Press the joystick up or down to select the
label and click the joystick.
Repeat steps 4 and 5 to label other input
modes.
Note
• If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
30
Operations