Sony KV-32XBR100 - Manual (Page 32)

7
Press the joystick up or down to select YES,
NO or NONE and click the joystick.
Choose To
YES Set for daylight saving start (set after the first
Sunday in April).
Current time automatically moves one hour
ahead.
NO Set for daylight saving end (set after the last
Sunday in October).
NONE Set if your area does not use daylight saving
time.
To correct the time
While the CURRENT TIME menu is displayed, press
the joystick up, down, right or left to select RESET, and
then click the joystick.
To display the current time on the TV screen
Press DISPLAY.
Notes
• If you unplug the TV or a power interruption occurs, the clock
setting will be erased. Reset the current time.
• If you connect a VCR using an RF cable, the TV may not set up
the correct current time information.
32 Operations
I
Setting the clock automatically
(CURRENT TIME—AUTO)
Some broadcasters offer XDS service in which they
transmit time signals with their broadcasts. This TV
can pick up these time signals to automatically set the
clock.
1
2
Press MENU.
Press the joystick up or down to select
TIMER and click the joystick.
Make sure the cursor (k ) is beside CURRENT
TIME, and click the joystick.
¡^MANUAL E3 AUTO
□
□ SUN --:--AM
ü Z) 0 RESET
Us«-i* RETURN ©Exit 5
Press the joystick right or left to select
AUTO and click the joystick.
The message appears.
□ MANUAL BAUTO
I When clock data
service is avail*
able, leaving the TV
off overnigt will
set the clock
I automatically.
IJYES m
Use €• RETURN® Exit®
5
Make sure the cursor is beside YES and click
the joystick.
To activate the AUTO clock setting, turn the
TV off.
The time signals automatically set the time for your
time zone and adjust your daylight saving time.
When you turn the TV on for the first time
after setting AUTO clock
• If your TV picked up the time signals, the clock
display with a message appears on the screen.
• If the dock sets, but your time zone or daylight
saving time is not set correctly, you can adjust these
settings. See "Setting your daylight saving time (DS
TIME)" or "Setting your time zone (TIME ZONE)"
on the next page.
• If your TV could not pick up the signals, a message
appears. Set the dock manually (page 31).
Note
• The message will disappear after 90 seconds. You can also
erase it by pressing VOL - on the TV or on the remote
commander.