Adjustment, Adjusting the picture quality – Sony GDM-2038 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustment
Adjusting the Picture Quality
When a computer or a work station of one of fhe presef-type models or equivalent
(see page 10) is connected, no picture adjustment is necessary.
In other cases, proceed as follows to get the optimum picture.
Turn on the unit, and feed the video signai from the connected computer/work
station.
Press the SELECT <iyi> buttons to choose the adjustment item.
The indicator corresponding to the selected item lights up.
When the power is turned on, the O/Q indicator is lit.
Pressing the SELECT < button changes the item in the following order:
9/0 ^ B/O' ^ OD/© ^
0/0 ^ 0/0 -> ffl/®
Pressing the SELECT t> button changes the item in the reversed order.
For what the indicators mean and how to make an adjustment, see the next page.
Observe the picture, and press the ADJUST +/- buttons (biue) or (red) while the
target indicator is lit.
To adjust the item shown below the indicator, use the ADJUST +/- buttons (blue).
To adjust the item shown above the indicator, use the ADJUST +/- buttons (red).
If you do not press the SELECT <I/I> buttons or the ADJUST +/- buttons within 10
seconds, the 9/a indicator lights up again.
11