Method 2, Method 3, Clearing all the user-stored conditions at once) – Sony GDM-2038 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clearing the User-Stored Condition for Picture Quality
Method 1
(Clearing the unnecessary
user-stored conditions only
for 9,
a ,
and ® )
User-stored conditions for the four itmes can be cleared independently from the input
signal.
Press the SELECT
<3
and i> buttons to choose the item whose user-stored condition
you want to clear. While the target indicator is lit, press the ADJUST < and l>
buttons (red) tor 9 (contrast) and ® (horizontal static convergence), or (blue) for Q
(brightness) and ffl (vertical static convergence), simultaneously for 5 seconds or
longer. The user-stored condition is reset to factory-preset condition.
Method 2
(Clearing the unnecessary
user-stored conditions only
for the items other than those
of Method 1)
Input the signal whose user-stored conditions you want to clear while the power is
turned on.
Press the SELECT <3 and > buttons simultaneously for 5 seconds or longer. The
relevant user-stored conditions are reset to factory-preset conditions.
Method 3
(Clearing all the user-stored
conditions at once)
Press the RESET button at the rear with the tip of a ball-point pen or a similar object
while the power is turned on. All the user-stored conditions are reset to factory-preset
conditions at once.
When the user-stored condition is cieared
The 7 indicators light up at the same time (for about 0.25 seconds).
15