Sony GDM-2038 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustment
Clearing the User-Stored Condition for Coior Temperature
Method 1
(Clearing the unnecessary
user-stored conditions only)
Select the color temperature by using the COLOR SELECT switch while the power is
turned on. Press the coior adjustment button. Then press the SELECT < and >
buttons simuitaneousiy for 5 seconds or ionger whiie the coior adjustment indicator is
iit. The user-stored conditions of the seiected color temperature are reset to factory-
preset conditions.
Method 2
(Clearing all the user-stored
conditions at once)
Press the color adjustment button while the power is turned on. While the color
adjustment indicator is lit, press the RESET button at the rear with the tip of a ball
point pen or a similar object. All the user-stored conditions are reset to factory-preset
conditions at once.
16