Making calls, If the handset battery becomes weak during a call, Notes – Sony SPP-A940 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basics
Making calls
TALK lamp.
VOL.
ВАТТ LOW lamp
( »TONE >-
2
3
Press (TALK).
The TALK lamp lights up, then
you'll hear a dial tone. If you
hear beeps, move closer to the
base unit.
Dial the phone number.
When you're done talking, press
(OFF) or replace the handset on
the base unit.
The TALK lamp goes off.
Additional tasks
To
Do this
Adjust the volume
Slide VOL up or down.
High or low volume can be selected.
Select a better channel
Press (CHANNEL).
Switch to tone dialing temporarily
Press (*TONE) while using the
telephone after you're connected.
The line remains in tone dialing
until disconnected.
If the handset battery becomes weak during a call
You hear a beep and the ВАТТ LOW lamp on the handset flashes.
The call will disconnect soon. Replace the handset on the base unit to
charge.
Notes
• Before dialing, make sure you can hear the dial tone, otherwise you cannot
dial correctly.
• When the TALK lamp lights up by pressing (TALK), the IN USE lamp on the
base unit lights up simultaneously.
14
"
Basics