Notes, To hear the current time, Recording the greeting – Sony SPP-A940 User Manual
Page 22: Setting up the answering machine (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Notes
• Press and hold (
SELECT
) to increase the minute setting by 10.
• The time and day arc preset to Monday, 12:00 AM.
• "CL" flashes when the day and time is cleared or delayed due to a power
interruption, or when you connect the base unit to the AC outlet for the first
time.
To hear the current time
Press (TIME/SET). The current time setting is announced.
Setting up the answering machine (continued)
Recording the greeting
You can record your own greeting for the "normal" and
"armouncement only" modes.
Press (MENU) until "Set out
going message" is announced.
"- -" blinks on the display.
Press ( RECORD/MEMO).
"Now recording" is announced
and a long beep sounds.
Speak into the base unit
microphone (MIC). The display
starts counting and you can
record up to 90 seconds.
To stop recording, press
( PLAY/STOP).
Your greeting replays
automatically.
Notes
• If you don't record your own greeting, prerecorded greeting will be assigned
automatically (see page 23).
• If your greeting is less than two seconds, the greeting is not recorded. The
prerecorded greeting will be assigned automatically.
• If a call comes in during recording, recording stops automatically.
• If 90 seconds have passed or memory becomes full in step 3, recording stops
automatically.
• "Memory full" is announced if no recording space is available when you
press (
RECORD/MEMO
). Erase unnecessary messages (see page 27).
Tip
To record an armouncement only greeting, set the announcement only mode at
first (see page 29), then follow the above instructions. Otherwise, the normal
greeting will be recorded.
It
Answering Machine Features