Sony SPP-A940 - Manual (Page 32)

Operating from an outside phone (continued)
Picking up new messages
1
Call your telephone number from a touch-tone phone.
2
when you hear the greeting, press CM) and enter your
security code.
A confirmation beep sounds.
If there are new messages, they are played back
automatically.
3
Press the keys in the "Table of control codes" for the desired
operation command.
4
When you finish, disconnect the line.
Notes
• Don't let two seconds elapse between each digit of the security code and the
control code.
• If you did nof fum on the answering machine, your phone picks up
automatically after ten rings,
• If the message recording memory runs out, the answering machine turns off
automatically. "Memory full. Please enfer your security code" is announced.
• If you enter wrong security codes three times, the line disconnects.
• If no keys are pressed wifhin 20 seconds, fhe line disconnects.
Tip
Press QT) (o) on the touch-tone keypad or ( PLAY/STOP) on the base unit to
disconnect the line.
Table of control codes
To Key Notes
Get help ®(D Press to access simple voice menu. Press again to
access advanced voice menu.
Play back messages CD® Plays back all messages
Repeat/skip backward CD® Press during play back to repeat a message. To
skip backward, press within two seconds after the
current message starts.
Stop operation CD® Stops every function
Skip forward CD® Press during play back to skip forward.
Record greeting CD® "Now recording" is announced.
Check greeting D® Review your greeting
Record a memo CD® "Now recording" is announced.
Erase individual messages ®® Press during play back
Turn answering machine on/off ®® Toggles the system on/off. "Answer machine is
on" or "Answer machine off" is announced.
32
^ Answering Machine Features