Normal display, Automatic clock setting, Note – Sony SLV-M10HF User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3: Hookups (continued)
Normal display
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you
Vurn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page
37.
Note
• To successfully record a program from the DSS receiver, proceed as follows:
- Leave the DSS receiver on all the time.
- Turn off the display (menu screen, channel number, etc.) of the DSS receiver.
- To record or receive locked channels, unlock the channel before the VCR starts
recording.
- To set pay-per-view programs in the timer setting, order the pay-p>er-view
program before the VCR starts recording.
- Some programs are copy protected. You cannot record these programs.
Getting Started