Operation, When recording on this vcr), Before you start editing – Sony SLV-M10HF User Manual
Page 84: To stop editing, Tips, Note, Operation (when recording on this vcr)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT to display "L2"
or "LI" in the display window.
• Press SP/EP to select the tape speed, SP or EP.
II PAUSE
I REC
3
4
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press II PAUSE.
Press 9 REC on this VCR and set it to recording pause.
To start editing, press the
II
PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the ■ STOP buttons on both VCRs.
Tips
• To edit more precisely, press the
II PAUSE buttons on the VCRs to release pause,
• To cut out unwanted scenes while editing, press
II PAUSE on this VCR when an
unwanted scene begins. When it ends, press
II PAUSE again to resume recording
(Assemble Editing).
Note
• If you start recording following the procedure above, the VCR won't start recording
with the APC function. To record a tape with the APC function, press 9 REC again
during recording pause in step 3 so that the VCR analyzes the tape. Then when you
start recording in step 4, press
II PAUSE immediately after the APC indicator stops
flashing. If you press
II PAUSE before the APC indicator stops flashing, the APC
function is canceled.
Additional
Operations