Recording tv programs (continued) – Sony SLV-M10HF User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording TV programs (continued)
Tips
• To select
a
channel, you can use the number buttons on the remote commander.
Enter the channel number, then press ENTER.
• You can select a video source form the UNE-l IN or LINE-2 IN jacks using INPUT
SELECT.
• Tile display appears on the TV screen indicating information about the tape, but the
information won't be recorded on the tape.
• If you don't want to watch TV while recording, you can turn off the TV. When
using a cable box, make sure to leave it on.
• You can set the channel with the shuttle ring during stop. However, you cannot set
the channel with the shuttle ring on the remote commander when:
- you set CABLE MOUSE in the CABLE BOX CONTROL menu to ON.
- you press JOG so that VCR is in jog mode.
Notes
• The remaining time may not be indicated accurately for short tapes such as T-20 or
T-30, or tapes recorded in the LP mode.
• The display does not appear during still (pause) mode or slow-motion playback.
• It may take up to one minute for the VCR to calculate and display the remaining
time after you press DISPLAY.
58 Basic Operations