Samsung 430 - Manual (Page 18)

Basic Features
Preferred Language
It
(digital channels only)
Use the up and down arrow keys to select a
language, and then press ENTER.
Digital-TV broadcasts can simultaneously
transmit many audio tracks (for example,
simultaneous translations of the program into
foreign languages).
You can only select a language from
among the being broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
■ Mono: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
■ Stereo: Choose for channels that are
broadcasting in stereo.
■ SAP: Choose to isten to the Separate
Audio Program, which is usually a
foreign-language translation.
Depending on the program being broadcast, you can
listen to Mono, Stereo or SAP.
Auto Volume (Off / On)
Normal equalizes the volume level on each channel, so that
when you change channels, the volume level is the same.
Night equalizes and decrease the volume level on each
channel, so each channel is quieter. Night is useful at night,
when you may want to keep the volume low.
Speaker Select (External Speaker /
TV Speaker) * •
If you are lisfening to the sound track of a broadcast or
movie through an external receiver, you may hear a sound
echo caused by the difference in decoding speed befween
the TV’s speakers and the speakers attached to your audio
receiver. If this occurs, set the TV to External Speaker.
When you set Speaker Select to External Speaker,
the TV’s speakers are turned off. You will hear sound
through the external speakers only. When you set
Speaker Select to TV Speaker both the TV’s speakers
and the external speakers are on. You will hear sound
through both.
When Speaker Select is set to External Speaker.
• TV Speaker: Off, External Speaker: On
When Speaker Select is set to TV Speaker.
• TV Speaker: On, External Speaker: On
If there is no video signal, both the TV’s speakers and
the external speakers will be mute.
Sound Reset (Reset All /
Reset Sound Mode / Cancel)
■ Reset All: Restore all sound settings to the factory
defaults.
■ Reset Sound Mode: Returns all sound values in the
currently selected mode to the default settings.
Setting the Time
,„ENU ŒD ^ Setup ^ Time ^ ENTERB
Time
Clock: Setting the clock to use the various timer features
of the TV.
The current time v
the INFO button. I appear every time you press
^ If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
- Auto: Have TV set the current time automatically
using the time from a digital channel.
You must have the cable or antenna connected
to the TV to set the time automatically.
- Manual: Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually. Select Clock Set. Select Date or Time,
and then press ENTER. Use the number buttons to
enter numbers or press the up and down arrow buttons.
Use the left and right arrow buttons to move from one
entry field to the next. Press ENTER when done. To exit
Clock Set, selet Close, and press ENTER.
Available only when Clock Mode is set to
Manual.
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
Time Zone: Select your time zone.
This function is only available when the
Clock Mode is set to Auto.
DST (Daylight Saving Time) (Off / On / Auto):
Switches the DST (Daylight Saving Time) function on or
off.
This function is only available when the
Clock Mode is set to Auto.
18 English