Samsung 430 - Manual (Page 27)

NOTE
* You must connect an Anynet+ device using an HDMi cable. Some HDMI cables may not support Anynet+ functions.
* Anynet+ works when the AV device supporting Anynet+ is in the standby or on status,
* Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
* However, you can connect only one Home Theater.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
o
>
Q.
<
::3
c> CO
C l
Tl
£15
t/i
Anynet+ Menu Description
View TV (d ianges Anynet+ rnride to 'fV i.)rriadoa:.vt ¡rurde.
Device List Shows the Anynet-r device iist.
Recording: ('recorder) Starts recording immediateiy using the recorder. (This is oniy avaiiabie for devices that
support the recording function.)
Stop Recording: ('recorder) Stops recording.
(device_name) MENU Shows the connected device menus. For exampie, if a DVD recorder is connected, the disc
menu of the DVD recorder wiii appear.
(device_name) INFO Shows the piay menu of the connected device. E.g. if a DVD recorder is connected, the
piay menu of the DVD recorder wiii appear.
Receiver Sound is piayed through the receiver.
If you have connected more than one recording device, they are displayed as (Tecorder) If you have connnected only one
recording device, it is displayed as (*device_name).
Setting Up Anynet+
0 MENU [m ^Application ^Anynet+ (HDMl-CEC) ^ ENTERS
■ Setup
Anynet+ (HDMl-CEC) (Off / On): To use the Anynet-i- Function, Anynet+ (HDMl-CEC) must be set to On.
“W When the Anynet+ (HDMl-CEC) function is disabied, aii the Anynet-i- reiated operations are deactivated.
Auto Turn Off (No / Yes): Set an Anynet+ Device to turn off automaticaliy when the TV is turned off.
“W if Auto Turn Off is set to Yes, running externai devices wiii turn off at the same time as the TV powers off.
Flowever, a device may not turn off if recording is in progress.
“W May not be enabied depending on the device.
Engiish 27