Storage and maintenance, Other information, English – Samsung 430 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

other Information

Issues

Solutions and Expianations

Image Retention (Burn In) Issue.

« To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology.

Pixel Shift technology enables you to set picture movement up/down (Vertical Line) and side to side

(Horizontal Dot).

The cable/set top box remote control

doesn’t turn the TV on or off, or adjust the

volume.

« Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the

SAMSUNG TV code.

A “Mode Not Supported” message

appears.

« Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly.

Refer to the resolution settings on page 11 of this manual.

Caption on TV menu Is greyed out.

• Caption can not be selected in the TV menu when connected via HDMI or Component (p. 21).

• Caption must be activated on the external device (p. 21).

There is a plastic smell from the TV.

« This smell is normal and will dissipate over time.

The TV Signal Strength is unavailable in

the Self Diagnostic Test menu.

« This function is only available with digital channels from an Antenna / RF/Coax connection (p. 22).

1 he IV is tilted to the side.

« Remove the base stand from the 1V and reassemble it.

The channel menu is greyed out

(unavailable).

• The Channel menu is only available when the TV source is selected.

Your settings are lost after 30 minutes or

every time the TV is turned off.

• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change

the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the

SOURCE button to select TV mode, and go to MENU Setup Plug & Play ENTER O' (p.

8).

You have intermittent loss of audio or

video.

• Check the cable connections and reconnect them.

« Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are

flexible enough for long term use. If mounting the TV to a wail, we recommend using cables with 90

degree connectors.

You see small particles when you look

closely at the edge of the frame of the TV.

« This is part of the product’s design and is not a defect.

POP (TV’s internal banner ad) appears on

the screen.

• Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8).

Some of above pictures and functions are avaiiabie at specific modeis oniy.

Storage and Maintenance

if you attached some stickers on the TV screen, it remains some debris after removing the sticker. Piease ciean it to

watch TV.

The exterior and screen of the product can get scratched during cieaning. Be sure to wipe the exterior and screen

carefuiiy using the cioth provided or a soft cioth to prevent scratches.

Do not .rjpray water or a cieaning agent direcfiy onto the

product. Any iiguid that tjoes irito tiie product may cause a

faiiure. fire, or electric -chijck.

Glean the product with a soft clotii darnpenerl with a srn:
amount of water.

36

English

Advertising