Note on the focus range, To shoot in the dark, To record from the beginning of the tape – Sony CCD-FX228 User Manual

Page 15: To prevent accidental erasure, For smooth transition

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Note on the Focus Range

If you cannot get a sharp focus
while in extreme telephoto

zoom, press the "W" side of

the power zoom button until
the focus is sharp. You can

shoot a subject that is at least
about 31/4 feet (1 m) away

from the lens surface in the
telephoto position, or about 1/
2 inches (1 cm) in the wide-

angle position.

Place the Camcorder on a
Flat Surface or Use a

Tripod

Keep the camcorder fixed by

placing it on a table top or any
other flat surface of suitable

height. If you have a tripcxi
for a still camera, you can also
use it with the camcorder.
Make sure the tripod screw is

shorter than 9/32 in. {6.5 mm).

To Shoot in the Dark

We recommend that you use

an optional video light. To get

the best color, you must
maintain a sufficient light
level.

To Record from the

Beginning of the Tape

Run the tape for about 15

st'conds before recording. This
prevents the camcorder from
missing any start-up scenes
when you play back the tape.

To Prevent Accidental

Erasure

Slide the tab on the cassette to

expose the red mark.

If you try to record with the
red mark exposed, the caution
lamp flashes on the

viewfinder, and you cannot

record.

To re-record on this tape, slide

the tab back out so it covers
the red mark.

For Smooth Transition

To obtain smooth transition
bcbx'cen scenes after the

battery pack is replaced, leave
the tape in the camcorder.

Using the Viewfinder as a
Sports Finder - For model

with the monochrome
viewfinder (CCD FX228/

FX230 only)

With the Sports Finder, you
can monitor the picture while
your eyes are at a distance
from the eyecup. You can
shoot scenes while moving
around.
When using the viewfinder as
a Sports Finder, turn the

viewfinder lens adjustment
ring clockwise until it stops.

CCD-FX228/FX230

o

fi.
5'

ta

When returning to the normal
viewfinder position, turn the

viewfmder lens adjustment
ring

counterclockwise

until the

indicators in the viewfinder

come into sharp focus.

15

^ 7^'^' \-rrr Y

Advertising