Sony CCD-FX228 - Manual (Page 31)

• Do not place the unit in locations that are:
- Extremely hot or cold
- Very humid^ dusty, dirty, or vibrating
If any difficulty should arise, unplug the unit and contact
your nearest Sony deiUer.
Battery Pack
• A brand new battery pack is not charged. Before using
the battery pack, charge it fully.
• After using the camcorder, remove the battery pack
from the camcorder, and place it in a cool place. When
the battery pack is attached to the camcorder, a small
amount of current flows to the camcorder even when the
POWER switch is set to OFF.
• Charge the battery immediately before using the
camcorder. The battery pack is always discharging even
when it is not in use.
• If the battery terminals are not clean, the battery
duration will be shortened. If the terminals get dirty,
you can clean them by repeatedly attaching and
removing the battery pack. Alternately wipe the + and -
terminals with a soft cloth or paper.
• Be sure that nothing metallic comes into contact with the
metal parts of the terminals. If it does, a short may occur
and the battery pack may be damaged
• Be sure to observe the following:
- To prevent an accident caused by a short circuit, do
not allow metal objects, such as a necklace, to
touch the battery terminals. Carry the battery pack
attached to the terminal cover.
>
a.
Q.
5
O
3
SL
3
-«»
o
- Keep the battery pack away from fire.
- Keep the battery pack dry.
- Do not open or convert the battery pack.
- Do not expose the battery pack to any mechanical
shock.
31