Making calls, Making calls on the handset, Making calls on the base phone – Sony SPP-AQ600 User Manual
Page 14: Additional tasks
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basics
Making calls
Making calls on the handset
1
2
3
Press (
talk
) and wait until the
TALK/BATT LOW lamp lights up.
You then hear a dial tone. If you
hear beeps, move closer to the base
phone.
Dial the phone number.
When you're done talking, press
CTALK). or replace the handset on
the base phone.
The TALK/BATT LOW lamp goes
off.
Making calls on the base phone
LINE lamp
Additional tasks
1
2
3
Press (SPEAKERPHONE).
The LINE lamp lights up.
You then hear a dial tone.
Dial the phone number.
When you're done talking, press
C SPEAKERPHONE )again.
The LINE lamp goes off.
To
Do this
.Select better channel
(only on the liandseU
Press rCHANNEL).
Put a call on HOLD
(only on the base phone)
Press (HOLD).
Press the button attain to resume the conversation.
Switch to tone dialing
temporarily
Press TONE ® after you're connected.
The line will remain in lone dialing until disconnected.
14™
Basics