To change the greeting, To erase the greeting, Selecting the ring time (on the base phone only) – Sony SPP-AQ600 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To change the greeting
Do in the same way as described on the previous page. The new
greeting replaces the old one.
To erase the greeting
1
Press
(
FLASH/REMOTE ).
2
Press ERASE/CD.
3
Press GREETING/CZ).
4
Press (FLASH/REMOTE) again.
Selecting the ring time (on the base phone only)
You can select the number oi rings before the phone answers to take
a message.
There are three modes. 3, 5. and TS (Toll saver).
1
Press
(
FUNCTION ).
2
Press (3).
3
Press
0
£))
or
C~')
to select "'3 times”, "5 limes”, or "Toll saver”.
To answer after 3 rings, select “3 times”.
To answer after 5 rings, select “5 times”.
Select "Toll saver" to answ'er after 3 times w'hen there is a new message and
after 5 times when there is no new message.
4
Press ®.
You will hear a long confirmation beep.
Note
Do not allow more than 20 seconds lo elapse between each step of the procedure.
Setting up the answering machine (continued)
26^
Using as a telephone answering machine